CH48108-1

This filter uses full-pleat, resin-impregnated micronic media that captures harmful particles, including metallic chips generated by abnormal engine wear. Oil passes through multiple layers of locked-in fibers to provide both surface and depth filtration without fiber migration into engine oil passages or bearing surfaces. The element is contained in a sealed disposable housing that incorporates an anti-drain back valve mechanism and an internal bypass valve. A heavy, corrugated steel center tube supports each convoluted pleat of the media and provides a collapse-pressure rating that is stated as twice that of other similar filters. A silicone-impregnated gasket is fitted to aid future removal from the engine. The can height is reduced by approximately 1/2 inch compared with a standard filter, and the overall length is referenced as about 4-3/4 inches. The filter is used on various aircraft including selected Cessna 320, 340, 401 and 402 models, as well as other installations where this size and thread configuration are specified. Packaging is described as 12 spin-on filters per corrugated shipping carton for bulk quantities, and the part carries FAA approval for aviation use.

• Spin-on configuration encloses the oil filter element in a sealed disposable housing
• Full-pleat, resin-impregnated micronic media provides surface and depth oil filtration
• Media construction traps harmful particles and metallic chips from abnormal engine wear
• Multiple layers of locked-in fibers prevent migration of filter material into engine oil passages or bearings
• Integrated anti-drain back valve mechanism and internal bypass valve specific to this filter series
• Heavy corrugated steel center tube supports convoluted pleats and increases collapse pressure rating
• Silicone-impregnated filter gasket facilitates removal during maintenance
• Can height reduced by approximately 1/2 inch compared with a standard-height filter
• Overall length referenced as approximately 4-3/4 inches for clearance-critical installations
• Intended for use on selected Cessna 320, 340, 401, 402 and other specified aircraft models
• Supplied in corrugated-board cartons with 12 spin-on filters per case for bulk packaging
• Holds increased quantities of dirt and harmful particles during normal operating intervals

Primary Part Number: CH48108-1
Alternate Part Number: AA48108-2
Filter Style: Spin-on oil filter
Media Type: Full-pleat resin-impregnated micronic filter media
Valve Features: Anti-drain back valve; internal bypass valve for this filter series
Approximate Overall Length: 4-3/4 in
Can Height Change: Approximately 1/2 in shorter than a standard-height filter of this type
Center Tube Material: Heavy corrugated steel
Gasket Type: Silicone-impregnated filter gasket
FAA Approval: Yes, FAA approved for aviation use
Typical Aircraft Applications: Cessna 320, Cessna 340, Cessna 401, Cessna 402 and other listed models
Weight: 1.52 lb
Pack Quantity (bulk packaging): 12 spin-on filters per shipping carton
Compatible Makes (application listing): Beechcraft, Cessna, Mooney
Representative Aircraft Models (application listing): Cessna 150, 152, 172, 180, 182, 185, 188, 205, 206, 207, 210, 310, 320, 336, 337, 340, 35, 401, 402, 414, 58; Mooney M20