Product Description

This hydraulic service jack is a 3 ton, long-reach, low-profile floor jack used to lift vehicles for service and maintenance. It raises up to 6000 pounds to provide access for work such as tire changes and undercarriage inspection on passenger vehicles and light trucks.

0 1. Overview

The jack uses a hydraulic system operated by a long handle and foot pedal, with a rotating saddle that contacts the vehicle at approved lifting points. The unit is built with a steel frame and hardware and uses non‑detergent 22 weight hydraulic jack oil. The handle measures 50 inches in length to provide leverage for lifting.

The lifting range extends from a minimum height of 3.25 inches to a maximum height of 24.25 inches. The working load is 6000 pounds, matching the 3 ton weight capacity. Overall product dimensions are 31.5 inches in length, 14.5 inches in width, and 9.75 inches in height, with a product weight of 103 pounds.

The design incorporates ball bearing swivel casters for 360‑degree mobility and a removable saddle to interface with lift accessories. The jack complies with ASME‑PASE standards. Operating instructions specify using the jack on a hard, level surface, positioning the saddle at vehicle manufacturer lifting points, raising with controlled handle strokes, and supporting the vehicle with appropriate jack stands before working underneath. Maintenance procedures include periodic inspection, lubrication with general‑purpose lithium grease at pivot points, and checking and filling hydraulic oil through the cylinder fill plug using the specified oil type.

0 2. Key Features

  • 3 ton (6000 lb) weight capacity
  • Hydraulic lifting mechanism operated by handle and foot pedal
  • Steel construction with high-strength hardware
  • Long handle measuring 50 inches for leverage
  • Low minimum height of approximately 3.25 inches
  • Maximum lifting height of approximately 24.25 inches
  • Ball bearing rear swivel casters for 360° mobility
  • Removable saddle compatible with lift accessories
  • Compliance with ASME-PASE standards
  • Specified for use with non-detergent 22 weight hydraulic jack oil
0 3. Specifications

Part Number: 56641
Brand: DAYTONA
Model: DS300LRBL
Type: Low profile long-reach hydraulic floor jack
Capacity: 3 tons
Working Load: 6000 lb
Weight Capacity: 3 tons (6000 lb)
Lift Height, Minimum: 3-1/4 in (3.25 in)
Lift Height, Maximum: 24-1/4 in (24.25 in)
Handle Length: 50 in
Material: Steel
Product Length: 31-1/2 in
Product Width: 14-1/2 in
Product Height: 9-3/4 in
Product Weight: 103 lb
Hydraulic Oil Type: Non-detergent 22 weight hydraulic jack oil
Certification/Standard: Complies with ASME-PASE standards
Color: Blue

FAQs

01. What is the maximum lifting capacity of part number 56641?

Part number 56641 has a maximum lifting capacity of 3 tons, or 6000 pounds.

02. What is the lift height range for this floor jack?

The lift height range for this floor jack is from approximately 3.25 inches minimum to 24.25 inches maximum.

03. What type of hydraulic oil is specified for the 56641 jack?

The 56641 jack is specified to use non-detergent 22 weight hydraulic jack oil.

04. What are the overall dimensions and weight of the 56641 jack?

The 56641 jack is approximately 31.5 inches long, 14.5 inches wide, 9.75 inches high, and weighs about 103 pounds.

05. Does this jack meet any specific safety or performance standards?

This jack complies with ASME-PASE standards.

Didn’t find your answer?

Don't hestitate to contact us, we’ll reply as soon as possible.