34 Results for National Aerospace Standard

Washer - Flat - #10 - ID: .203, OD: .438, Thickness: .063 - Steel, Cadmium II Plated (NAS1149F0363P)

Washer - Flat - 3/8 - ID: .390, OD: .625, Thickness: .032 - Steel, Cadmium II Plated (NAS1149F0632P)

Washer - Flat - 5/16 - ID: .328, OD: .562, Thickness: .063 - Aluminum, Chemical Conversion Coated (NAS1149D0563J)

Washer - Flat - 3/8 - ID: .390, OD: .625, Thickness: .063 - Aluminum, Chemical Conversion Coated (NAS1149D0663J)

Bolt - Close Tolerance - Short Thread - 10-32 x 0.464 - Grip 3/16 - Cadmium II Plated

#10, High temp Stainless, Passivated

National Aerospace Standard NAS1149F0316P Carbon Steel Washer, Flat

National Aerospace Standard NAS1149F0332P Carbon Steel Washer, Flat

National Aerospace Standard NAS1149F0463P Carbon Steel Washer, Flat

#10 Nylon Washer, Thin

Preformed O-Ring, Inside Diameter: 9/16, Outside Diameter: 11/16, Thickness: 1/16

Preformed O-Ring 0.676

Preformed O-Ring 0.799, ethylene propylene, phosphate ester resistant

preformed packing, 3/16, straight thread tube fitting boss, ethylene propylene, phosphate ester resistant

National Aerospace Standard NAS1612-4A O-Ring

National Aerospace Standard NAS1612-6A O-Ring

Countersunk 100 Degree, Machine Screw 6-32 x 0.401, grip 1/8, Steel

Floating, Two Lug Nut plate - Height: 0.375, Thread: 10-32, Two Lug Floating Nut plate, Deep Counter Bore

Spacer, Sleeve - Screw or Bolt Diameter: 1/4 - OD: .365 - .385, ID: .256 - .297 - Length: 7/8 - Steel, Cadmium II Plated

Close Tolerance Pan Head 8-32 x 0.573, grip 1/4, Steel

Countersunk 100 Degree, 8-32 x 3/4, Steel Cad Plated

Steel Lubrication Fitting

Countersunk 100 Degree, Close Tolerance, 10-32 x 15/32, Alloy Steel, Cadmium

Pan Head Machine Screw 4-40 x 3/16 Steel Cad Plated