Product Description

This item is a red LED anti-collision beacon for 14 VDC aircraft electrical systems, configured with a 2.6 inch base for upper mounting to provide 360 degree warning light coverage on fixed wing airframes that use a compact round beacon footprint.

0 1. Overview

The 01-0772010-50 beacon corresponds to model OR36R1N in a 360 degree LED anti-collision series for fixed wing aircraft. It uses a round 2.6 inch base sized to replace earlier beacons with the same footprint while reducing installed profile height compared to many legacy units. The light output pattern covers the full azimuth around the aircraft to meet anti-collision signaling requirements when installed in approved locations.

This beacon operates from a nominal 14 volt direct current supply and integrates its LED light source and control electronics in a single compact assembly. The construction supports installation on upper fuselage or tail mounting points where a 2.6 inch round base is specified. The design is part of a beacon family approved under FAA TSO-C96a Class III, and red, red/white split, and white assemblies in the same series share common installation and documentation sets. The assembly weight is approximately 0.37 pounds, supporting use on light aircraft where minimal additional mass at the mounting point is important.

0 2. Key Features

  • Model designation OR36R1N within a 360 degree LED beacon family
  • Red LED light output for anti-collision service
  • Nominal 14 VDC operating voltage
  • 2.6 inch round base configuration for upper mounting
  • Designed as a lower-profile replacement for earlier 2.6 inch and 3.75 inch round beacons
  • Approved under FAA TSO-C96a Class III
  • Single self-contained LED beacon assembly
  • Approximate assembly weight of 0.37 pounds
0 3. Specifications

Model: OR36R1N
Manufacturer Number: 01-0772010-50
Light Type: LED anti-collision beacon
Color: Red
Operating Voltage: 14 VDC
Base Diameter: 2.6 in round base (upper mount)
Application: Fixed wing aircraft anti-collision lighting
Certification: FAA TSO-C96a Class III
Approximate Weight: 0.37 lb
Configuration: Upper mount beacon in a 360 degree Orion series

FAQs

01. What is the operating voltage of part number 01-0772010-50?

Part number 01-0772010-50 operates on a nominal 14 VDC aircraft power supply.

02. What mounting footprint does the 01-0772010-50 beacon use?

The 01-0772010-50 beacon uses a 2.6 inch round base footprint for upper mounting locations.

03. What light color does the 01-0772010-50 beacon provide?

The 01-0772010-50 beacon provides red LED light output for anti-collision signaling.

04. Under which FAA TSO is the 01-0772010-50 beacon approved?

The 01-0772010-50 beacon is approved under FAA TSO-C96a Class III.

05. Is the 01-0772010-50 beacon intended for fixed wing applications?

The 01-0772010-50 beacon is part of a 360 degree LED beacon series designed for fixed wing aircraft.

Didn’t find your answer?

Don't hestitate to contact us, we’ll reply as soon as possible.